Type Of Product : Cement Base Walputty
Finish : Ruff
Sheen Level : NA
Film Integrity : NA
Colour : White
Water Dilution : 400 ml per kg
Application Area : Interior / Exterior
Application Coat : 1 Coat
Application Tools : Pattra
Film Thickness : 2 - 2.5 mm in 1 coat
Drying Time : 45 min
Recoat Time : 6 – 8 Hours
Coverage : 5 – 6 Sq Ft / kg ( 1 coat )
Self Life : 12 month from the date of Manufacturing
Washability : Normal
Recommended Usage : Interior / Exterior Cement plaster / Asbestos Sheet
- Bonding to the base plaster
- Reduction in cracks
- Evenness of wall/Celling surface
- Reduce putty consumption
- High Durability
- Saves Time
- Cost-Effective
- Sanding
- Pre-Wet the surface
- Dampen the surface to be plastered with clean water. Allow excess water to drain off.
- Apply the first coat of coarse putty with a putty Patra or blade to a thickness of 2-3mm.
- Cover all undulations and rough surface in 1st coat.
- Allow the surface to dry for at least 3 to 4 hours.
- If needed, then apply 2nd coat of 1-2 mm after the 1st coat completely dried.
- Application of fine wall putty is a must on top of Coarse Putty